20240322_191831608_iOS

Agilent 6632B Teardown & Transient Response

The HP/Agilent 6632B is a remarkable power supply. There are some similarities with the mobile communication DC source 66309D I “repaired” recently: The 6632B is optimized for a fast transient response and it has a low current range too. But the circuit and its properties differ significantly. One important aspect: Where the 66309D only has a downprogrammer that doesn’t track the current setpoint, the 6632B goes all-in: It’s a two-quadrant power supply - able to source and sink current over the full operating range from 0-20V at 0-5A in CV and CC mode. ...

March 22, 2024 Â· 2 min Â· Sebastian
20230813_163612886_iOS

HP 6060B System DC Electronic Load: Adjustment

Currently, the unit’s setpoint accuracy isn’t all that great (readback resolution is limited as well, but shows the offset): Regardless of the range it has an offset of about +20 mA. Sure, for a unit capable of 60 A that seems reasonable, and well within its specs of ±0.1% ±75 mA. But since I’ll use it in the low range (6A) most of the time and likely often even well below 1A that doesn’t seem too great, does it? ...

August 17, 2023 Â· 7 min Â· Sebastian
20230813_163640803_iOS

HP 6060B System DC Electronic Load: Teardown, Service

I recently got my hands on a HP 6060B System DC Electronic Load (later also sold as Agilent 6060B). My unit has option 020 installed: Comically large binding posts also on the front panel. This option certainly is not unheard of, but not too common either. Retrofitting is possible, but can be quite some work. Huge binding post also on the front panel thanks to option 020 ...

August 13, 2023 Â· 6 min Â· Sebastian